Changing a Password

1. Use the t and i keys to highlight the Set Supervisor Password parameter and press the Enter key. The Set Password box appears.

Set Supervisor Password

Enter Current Password Enter New Password Confirm New Password

  1. Type the current password in the Enter Current Password field and press Enter.
  2. Type a password in the Enter New Password field. Retype the password in the Confirm New Password field.
  3. Press Enter. After setting the password, the computer sets the User Password parameter to "Set".
  4. If desired, you can enable the Password on boot parameter.
  5. When you are done, press F10 to save the changes and exit the BIOS Setup Utility. If the verification is OK, the screen will display as following.

[

Continue

in saved. ]

The password setting is complete after the user presses Enter.

If the current password entered does not match the actual current password, the screen will show you the Setup Warning.

Setup Warning

Inva

Continue

zord. ]

If the new password and confirm new password strings do not match, the screen displays the following message.

Setup Warning

Passwo Re-e

rds do no nter pass

t match. word.

This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes the USB diskette drives, the onboard hard disk drive and the DVD drive in the module bay.

InsydeH20 Setup Utility

InsydeH20 Setup Utility

Insydeh20 Bios Usb Boot

2. IDE1 :

  1. Network Boot
  2. USB HDD
  3. USB CDROM
  4. USB FDD :

Atheros Boot Agent

2. IDE1 :

  1. Network Boot
  2. USB HDD
  3. USB CDROM
  4. USB FDD :

Atheros Boot Agent

Item Specific Help

Use <t > or <1 > to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

Help Exit a

Select Select

Item Menu

Change Values Select ► SubMenu

Setup Default Save and Exit

Exit

The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.

Insydeh20 Setup Utility Rev
The table below describes the parameters in this screen.

Parameter

Description

Exit Saving Changes

Exit System Setup and save your changes to CMOS.

Exit Discarding Changes

Exit utility without saving setup data to CMOS.

Load Setup Default

Load default values for all SETUP item.

Discard Changes

Load previous values from CMOS for all SETUP items.

Save Changes

Save Setup Data to CMOS.

The BIOS flash memory update is required for the following conditions:

  • New versions of system programs
  • New features or options
  • Restore a BIOS when it becomes corrupted.

Perform the following steps to use the DOS Flash Utility:

  1. Press F2 during boot to enter the Setup Menu.
  2. Select Boot Menu to modify the boot priority order, for example, if using USB HDD to Update BIOS, move USB HDD to position 1.
Networkboot Atheros Boot Agent

Network Boot : Atheros Boot Agent USB HDD

USB CDROM

Use <t> or <!> to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

Network Boot : Atheros Boot Agent USB HDD

USB CDROM

Use <t> or <!> to select a device, then press <F5> to move it down the list, or <F6> to move it up the list. Press <Esc> to escape the menu

Change Values Select ► SubMenu

Setup Default Save and Exit

3. Execute the FLASH.BAT batch file to update BIOS. Or enter C:\ Flash it bios ver.fd/dc The flash process begins as shown.

Insyda Flash Utility Tor

InsydeH20

Uorslon 1.2m

InlHdlzlrq

riU loading IBS x

Current BIOS Hods] u

*G : JHTIfl

BIDS Hods I Ml

m ■■ Jona

CurrHirt BIOS vttrslDnï

ua.zi

BIBS wtton:

m.zs

1-1 m™-ic *t F m

Wm

4. In flash BIOS, the message Please do not remove AC Power Source displays. NOTE: If the AC power is not connected, the following message displays.

C:\it0nvlfl71fljflosti ji>MB0Z3

1 \HOHVjnTIB> flash it Jflt 10823. fd /fl /B /DC

Uamning: Mo ftC power connect

C:nR0HnJRT1B>_

IDUtXnV HDMETHEATt«

___-_—im-

Plug in the AC power to continue.

5. Flash is complete when the message Flash programming complete displays.

Perform the following steps to use the WinFlash Utility:

  1. Double click the WinFlash executable.
  2. Click OK to begin the update. A progress screen displays.
Acer Aspire 7530 Mode Emloi

3. When the process is complete, close all programs and applications and reboot the system.

The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Responses

  • pauline
    How can i change my password on acer 1410?
    8 years ago
  • Wilda
    How to use atheros boot agent?
    8 years ago

Post a comment