Security

The Security screen contains parameters that help safeguard and protect your computer from unauthorized use.

Phoenix cME FirstBIOS Pro Setup Utility

Information Main Advanced

Security

Boot Exit

Item specific Help

Supervisor Password Is: Clear

User Password Is: Clear

Set Supervisor Password: [Enter]

Set User Password: [Enter]

Primary Harddisk Security: [Disabled]

Password on Boot: [Disabled]

Select Item Select Menu

Enter

6 Change Values Select ► Sub-Menu

Item specific Help

Supervisor Password controls access to the setup utility.

F9 S nu F10

Setup defaults Save and Exit

The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings.

Set Supervisor/User Password

If password on boot is required, the password must be set otherwise it cannot be enabled. The formats of the password are as follows: Length No more than 8 characters Characters 0-9,A-Z (not case sensitive)

Parameter

Description

Option

Set User Password

Press Enter to set the user password. When set, this password protects the BIOS Setup Utility from unauthorized access.

Length -- No more than 8 characters

Characters -- 0-9, A-Z (not case sensitive)

Set Supervisor Password

Press Enter to set the administrator password. When set, this password protects the BIOS Setup Utility from unauthorized access.

Primary Harddisk Security

Disabled

Parameter

Description

Option

Password on Boot

Defines whether a password is required or not while the events defined in this group happened. The following suboptions are all requires the Supervisor password for changes and should be grayed out if the user password was used to enter setup.

Allows the user to specify whether or not a password is required to boot.

Check Uncheck

0 0

Post a comment