Disassemble Case Touchpad and CDPlayer

  1. Remove the one screw located as highlight on the top case.
  2. Remove the fourteen screws located on the base.
  3. Detach the top case out from the system.
  4. Pull up the tabs on both side to disconnect the CD-Player flat flexible cable from the CD-Player board.
  5. Pull the tabs on both side forward to disconnect the touchpad cable from the mainboard.
  6. Remove the two screws to release the touchpad board.
  7. Then detach the touchpad board from the support.
  8. Tear tape on these positions to disconnect the cables.
  9. Pull the tabs on both side forward to disconnect the cables from touchpad board.
  10. Remove the two screws to remove the CD-Player module.
  11. Then take the CD-Player module out from the system.
  12. Remove the two screws located on the CD-Player board.
  13. To separate the CD-Player board from the bracket.
  14. Remove the three screws to release the Touchpad support.
  15. Detach the touchpad support from the touchpad then take the touchpad from the top case.
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment