BIOS Setup Utility

The BIOS Setup Utility is a hardware configuration program built into your computer's BIOS (Basic Input/ Output System).

Your computer is already properly configured and optimized, and you do not need to run this utility. However, if you encounter configuration problems, you may need to run Setup. Please also refer to Chapter 4 Troubleshooting when problem arises.

To activate the BIOS Utility, press M during POST (when "Press <F2> to enter Setup" message is prompted on the bottom of screen).

Press M to enter setup. The default parameter of F12 Boot Menu is set to "disabled". If you want to change boot device without entering BIOS Setup Utility, please set the parameter to "enabled".

Press <F12> during POST to enter multi-boot menu. In this menu, user can change boot device without entering BIOS SETUP Utility.

PhoenixBIOS Setup Utility

^Information |

Advanced Security Boot Exit 1

CPU Type

Intel® Pentium® 4

CPU Speed

2.8 GHz

Floppy Drive:

Net installed

HDD Model Name:

Toshiba MK3021GAS-(PM)

HDD Serial Number:

Y3KJ2066TK

ATA PI Model Name:

QSI Ci>RW/DVD-ROM SBW242B-(SM)

ATA PI Serial Number:

None

System BIOS Version:

V0.18

VGA BIOS Version:

003.0171.013.000

KBC Version:

2.13.29

Serial Number:

XXX XX XXX XXX XX XXX xxxx

Asset Tag Number:

N/A

Product Name:

TravelMate 2000 Displays product model names

Manufacturer Name:

Acer

UUID:

OOOOOOOO-OOOCkOOOO-OOOfrOOOOOOOO

Help Q Select Item Exit Select Menu

Change Values Selec! ► Sub-Menu

Setup defaults Save and Exit

Was this article helpful?

0 0

Post a comment