Undetermined Problems

The diagnostic problems does not identify which adapter or device failed, which installed devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative.

Follow these procedures to isolate the failing FRU (do not isolate non-defective FRU).

NOTE: Verify that all attached devices are supported by the computer.

NOTE: Verify that the power supply being used at the time of the failure is operating correctly. (See "Power System Check" on page 82):

  1. Power-off the computer.
  2. Visually check them for damage. If any problems are found, replace the FRU.
  3. Remove or disconnect all of the following devices:
  • Non-Acer devices
  • Printer, mouse, and other external devices
  • Battery pack
  • Hard disk drive

□ DIMM

  • CD-ROM/Diskette drive Module
  • PC Cards
  1. Power-on the computer.
  2. Determine if the problem has changed.
  3. If the problem does not recur, reconnect the removed devices one at a time until you find the failing FRU.
  4. If the problem remains, replace the following FRU one at a time. Do not replace a non-defective FRU:
  • System board
  • LCD assembly
The Ultimate Computer Repair Guide

The Ultimate Computer Repair Guide

Read how to maintain and repair any desktop and laptop computer. This Ebook has articles with photos and videos that show detailed step by step pc repair and maintenance procedures. There are many links to online videos that explain how you can build, maintain, speed up, clean, and repair your computer yourself. Put the money that you were going to pay the PC Tech in your own pocket.

Get My Free Ebook


Post a comment