Disassembling the Optical Drive Module

  1. Remove the two screws holding the ODD bracket.
  2. Remove another screw as the picture shows.
  3. Then remove the last two screws on the back side of the ODD module.
  1. Slide the ODD from the ODD bracket.
  2. Then remove the optical bracket.
  1. In order to open the ODD, use an uncurved pin to press the emergency eject hole.
  2. Remove the three screws that fasten the ODD door.
  3. Then detach the ODD door.

Was this article helpful?

0 0

Post a comment