Removing the Pcmcia Slot

  1. See "Removing the Battery" on page 50.
  2. See "Removing the Middle Cover" on page 54.
  3. See "Removing the Keyboard" on page 61.
  4. See "Removing the Upper Case Assemly" on page 63.
  5. See "Removing the Middle Cover Hook /Fan" on page 61.
  6. See "Removing the Thermal Module" on page 62.
  7. See "Removing the VGA Thermal Plate" on page 64.
  8. See "Removing the CPU Heatsink Plate" on page 65.
  9. See "Removing the Second Fan Bracket" on page 65.
  10. See "Removing the ODD Module(2)" on page 66.
  11. See "Removing the HDD Bracket" on page 66.
  12. See "Removing the Main Board" on page 67.
  13. Remove the four screws that secure the PCMCIA slot, then remove the PCMCIA slot from the lower case.

Removing the Speaker

Set

1.

See

"Removing the

Battery" on page 50.

2.

See

"Removing the

Middle Cover" on page 54.

3.

See

"Removing the

Keyboard" on page 61.

4.

See

"Removing the

Upper Case Assemly" on page 63.

5.

See

"Removing the

Middle Cover Hook /Fan" on page 61

6.

See

"Removing the

Thermal Module" on page 62.

7.

See

"Removing the

VGA Thermal Plate" on page 64.

8.

See

"Removing the

CPU Heatsink Plate" on page 65.

9.

See

"Removing the

Second Fan Bracket" on page 65.

  1. See "Removing the ODD Module(2)" on page 66.
  2. See "Removing the HDD Bracket" on page 66.
  3. See "Removing the Main Board" on page 67.
  4. See "Removing the DC Board" on page 68.
  5. Tear off the tape fastening the speaker set cable. Then remove the four screws that secure the speaker set. Remove the speaker set from the lower case.

Was this article helpful?

0 0

Post a comment