Disk to Disk Recovery

  1. Prepare NAPP CD, Recovery CD and System CD.
  2. Put NAPP CD into the optical drive. Then boot up the system.
  3. The system will ask you if you want to build NAPP Master HDD. Please press any key to continue.

The HDD Must bigger then 20GB.

Do you want to build NfiPP Master HDD? press anv key to continue or Grt1—C to exit

4. NAPP CD will start to preload the system, please click [Y].

Acer NAPP Preload Selector for Acer Systen Uersion 1-4.0-1 Copyright 2003 Acer Inc.

This will preload your systen. Are you sure?[V,N1?

5. Select Disk to Disk Recovery. Then choose Single Language or Multi-Languages Recovery. NOTE: For Multi-Languages Recovery, not more than five languages could be loaded to the system.

Method Selector

1» Single Language Recovery 2- Multi—Languages Recovery X. Quit

6. Put the Recovery CD to the optical drive. This step is to create image files to the system, you do not have to put the Recovery CD to the optical drive in order. Place one Recovery CD to the drive at one time till you finish all Recovery CDs.

Please Insert Any Recovery CD

Please Press Any Key to Continue. Press any key to continue...

After you place the Recovery CD to the optical drive, you will see the display below.

Please Wait For COPYING X : \images V70E48I 81 . HDD

7. Then insert the System CD to the optical drive.

Please Insert the System CD

Please Press Any Key to Continue. Press any key to continue...

8. You will see the screen displaying "PASS" when the system has buit NAPP Master hard disc drive.

**** PLEASE REMOUE YOUR CD?*!t* **** press any key to exit??

Was this article helpful?

0 0

Post a comment